No matter whether they are used in bathroom joints or kitchens - silicone sealants are an important product in the DIY sector. It is a material that exists in many areas of everyday life. High-quality ingredients, such as the low-viscosity extender oils in silicone sealants, are a decisive factor and one of reasons for Haltermann Carless’s recent investment in plant technology. The goal: to produce even better, higher purity products for the base oils industry. Read more here.
Low-viscosity base oils are needed to produce silicone sealants. As extender oils, they contribute significantly to the quality of seals and ensure a silicone sealant
To achieve this high sealant quality, an extender oil with high compatibility to the silicone component, lowest possible aromatic content and high purity is required.
Haltermann Carless now offers manufacturers of silicone sealants new grades of its Pilot® Oil range with improved quality properties. The new Pilot® Oil grades are ideally suited as extender oils in acetoxy and alkoxy silicone sealants.
The new hydrogenation plant at Haltermann Carless' Speyer site offers modern technology, capacity increases, high production flexibility and, above all, new product types with even higher qualities.
This is particularly evident in the case of Middle Distillates. Our new hydrogenation plant can reduce the aromatics content to an extremely low level, which further down the line reduces the risk of yellowing of the finished silicone sealant. These products are odourless, clear and colourless and are ideal for use in silicone sealants due to their excellent compatibility with the material.
New Pilot® Oil grades impress with their property profile:
Our Pilot® 400H and Pilot® 500H are ideal for use as extender oils in silicone sealants.
Read more about this:
|
Typical data |
Method |
Pilot® 400H |
Pilot® 500H |
|
GMID |
379559 |
380073 |
|
|
Appearance |
Visual |
Clear & colorless |
Clear & colorless |
|
Colour (Saybolt) |
ASTM D 156 |
30 |
30 |
|
Initial Boiling Boint (IBP) |
ASTM D86 |
280 °C |
280 °C |
|
Final Boiling Boint (FBP) |
ASTM D86 |
320 °C |
360 °C |
|
Density @ 15 °C |
EN ISO 12185 |
820 kg/m3 |
820 kg/m3 |
|
Flash Point (PM) |
EN ISO 2719 |
min. 130 °C |
min. 130 °C |
|
Kinematic Viscosity @ 40 °C |
DIN 53015 |
4.5 mm²/s |
5.5 mm²/s |
|
Aromatics (UV) |
HM-14-Labor |
max. 1000 ppm |
max. 1000 ppm |
|
Pour Point |
DIN ISO 3016 |
max. -10°C |
max. -5 °C |
|
FDA CFR 21 178.362 |
B |
B |
|
|
CAS Number. |
64741-91-9 64742-46-7 |
64741-91-9 64742-46-7 |
|
|
EC Number |
919-029-3 |
919-029-3 |
In addition to a convincing technical profile, the new Pilot® Oils offer a wide range of formulation options and comply with all industry regulations with a minimum aromatic content.
Do you know about Haltermann Carless' 360° Service for partners in the sealing industry? This includes, among other things:
For manufacturers of silicone sealants, the new Pilot® Oil types Pilot® 400H and Pilot® 500H from Haltermann Carless are excellent extender oils for high-quality silicone sealants. The extremely low aromatic content ensures long-lasting product properties without yellowing or brittleness. This means that seals last for a long time and contribute to sustainability. In addition, Pilot® 400H and Pilot® 500H are ideally suited for customised solutions. Please contact us for more information.